Clean repair area of dirt and contaminants. Twist off protective cap. Attach mixing tip. Place cartridge in holder, then holder into a standard caulk gun. Slowly trigger the gun to move Crack Patch down the mixing tip. Apply product to disposable material to be certain product has mixed thoroughly. Insert static tip into crack or seam so material fills void. As material sets, surface may be smoothed with a light, brushing motion with a finger or tool. Take caution as to not allow the material to stick to finger or tool. If tube is not empty after repair, leave tip in place until next application, then replace with new tip.
CLEAN-UP. Use rubbing alcohol to remove from skin or other surfaces as quickly as possible before product cures.